Thermal labels removable, 102 x 50mm, 1300 labels

Article number: Z-102-50-25-R
Description

Thermal labels removable, 102 x 50mm, 1300 labels, removable adhesive, 25 mm core

These removable thermal labels measure 102 x 50 mm and are supplied on a roll with 1300 labels. The 25 mm core is suitable for direct thermal desktop label printers that accept this roll size.

The removable adhesive is useful when labels should be taken off again without being intended as a permanent marking. They can be used for temporary product identification, shelf labels, internal routing labels, stock locations and reusable containers.

The labels are designed for direct thermal printing, so no ribbon is required. Use them on clean, dry surfaces and always check that your printer supports 102 x 50 mm labels on a 25 mm core.

Specification

Identification

Article number
Z-102-50-25-R

Dimensions

Width
102 mm
Height
50 mm
Labels per roll
1300
Core diameter
25 mm
Outer diameter
110 mm

Roll / detection

Perforation
Yes
Winding
Outside wound
Sensor / detection Indicates how the printer detects the start of each label, for example by gap, black mark, index mark or continuous media setting.
Gap detection
Spacing between labels The physical space between two labels on the roll, usually expressed in millimetres. The printer can use this gap to detect the next label.
3 mm

Material and adhesive

Material
Paper
Printing method
Direct thermal
Colour
White
Glue
Removable
Thermal coating Indicates whether the direct thermal material has an ECO or TOP coating. TOP / topcoated labels have an additional protective layer over the thermal coating.
TOP / topcoated
Ribbon required Direct thermal labels do not require a ribbon. Thermal transfer labels are printed with a thermal transfer ribbon.
No

Use and compliance

BPA-free Indicates whether the material is stated to be free of this substance.
Yes
BPS-free Indicates whether the material is stated to be free of this substance.
Yes
BPF-free Indicates whether the material is stated to be free of this substance.
Yes
Phthalate-free Indicates whether the material is stated to be free of this substance.
Yes

Identification

Article number
Z-102-50-25-R

Dimensions

Width
102 mm
Height
50 mm
Labels per roll
1300
Core diameter
25 mm
Outer diameter
110 mm
Corner radius
2 mm
Shape
Rectangular

Roll / detection

Perforation
Yes
Winding
Outside wound
Sensor / detection Indicates how the printer detects the start of each label, for example by gap, black mark, index mark or continuous media setting.
Gap detection
Spacing between labels The physical space between two labels on the roll, usually expressed in millimetres. The printer can use this gap to detect the next label.
3 mm
Detection gap Indicates whether the roll has a physical detection gap or opening used by the printer to position the label.
No
Black mark Indicates whether the backing has a black mark used by the printer to detect the label position.
No

Material and adhesive

Material
Paper
Printing method
Direct thermal
Colour
White
Glue
Removable
Thermal coating Indicates whether the direct thermal material has an ECO or TOP coating. TOP / topcoated labels have an additional protective layer over the thermal coating.
TOP / topcoated
Ribbon required Direct thermal labels do not require a ribbon. Thermal transfer labels are printed with a thermal transfer ribbon.
No

Use and compliance

Storage conditions
For optimal processing and preservation of material properties, store in the original closed packaging at 23°C (±2°C) and 50% relative humidity. Avoid direct exposure to UV light, high temperatures, moisture and heat sources.
BPA-free Indicates whether the material is stated to be free of this substance.
Yes
BPS-free Indicates whether the material is stated to be free of this substance.
Yes
BPF-free Indicates whether the material is stated to be free of this substance.
Yes
Phthalate-free Indicates whether the material is stated to be free of this substance.
Yes
Downloads

Download datasheet

Compatible with these printers
Frequently asked questions
Are removable labels always removable without leaving adhesive residue?

Removable labels use a special adhesive that bonds less strongly than permanent adhesive. This means they can usually be removed easily without leaving adhesive residue. However, this cannot be guaranteed under all circumstances. The surface, temperature, duration of use and storage conditions can all affect how removable the labels are.

Can removable labels stay in place for a longer period?

Yes, but removability can change over time. Factors such as prolonged exposure to heat, sunlight and fluctuating temperatures can affect the properties of the adhesive. With long-term use it may therefore become harder to remove the labels without leaving adhesive residue. Test in advance whether the labels are suitable for the intended period of use.