Transfer ribbon - resin - 110mm x 450m

Article number: 04800BK11045
Description

Transfer ribbon - resin - 110mm x 450m

This resin ribbon is the most durable choice for thermal transfer printing, meant for labels that take a beating: exposure to chemicals, heat, outdoor weather, friction or moisture. Think of labels on chemical drums, industrial rating plates, outdoor storage, or labels on plastic (polypropylene/polyester) packaging. Then this is the right choice. This ribbon measures 110mm x 450m.

The difference with wax lies in the composition: resin is far more chemical- and heat-resistant, and also adheres well to synthetic (plastic) labels, where wax doesn't hold up well enough. Do you mostly print on plain paper indoors, without any special demands? Then a wax ribbon is more affordable and works just as well.

This ribbon is used together with a thermal transfer printer: the printhead melts the resin coating on the ribbon onto the label. That gives a print that resists scratches, solvents and extreme temperatures, and stays legible and scannable long-term, even under harsh conditions.

Universally compatible: suitable for most label printers that support this ribbon format, such as Zebra, Honeywell, TSC, Godex, Citizen and more.

Specification

Identification

Article number
04800BK11045
EAN
6978243073638

Dimensions

Width
110 mm
Length
450 m
Core diameter
25 mm

Roll / detection

Winding
Outside wound

Material and adhesive

Material
Resin

Use and compliance

Suitable for
Universally compatible: suitable for most label printers that support this ribbon format, such as Zebra, Honeywell, TSC, Godex, Citizen and more.
Downloads

Download datasheet

Frequently asked questions
Do I need to check the maximum outer diameter my printer allows for a roll this long?

Yes. A 450 metre roll is wound to a larger outer diameter than shorter rolls, and needs enough physical clearance in your printer's ribbon compartment, separately from checking the core diameter and width.

Most desktop printers aren't built for rolls this size; they're more common in larger industrial printers. Check your printer's specifications for the maximum ribbon roll diameter it accepts before ordering a 450 metre roll.

Is a longer roll of ribbon more cost-effective than a shorter one?

Often yes, per metre of ribbon, longer rolls tend to be somewhat more economical, and you spend less time and labour swapping rolls, which matters more at higher print volumes.

That's only worthwhile if your printer supports this length and you actually get through that much ribbon before it degrades or your labelling needs change. For lower, occasional print volumes, a shorter roll that matches your actual usage can be more practical, even at a slightly higher cost per metre.

What industrial applications is this resin ribbon commonly used for?

Because of its resistance to chemicals, heat, moisture and abrasion, this type of ribbon is commonly used for chemical drum labels, industrial rating plates, product identification labels, and labels that need to stay legible for a long time in demanding environments.

It's also a common choice for laboratory labelling, where labels may be exposed to solvents or handling over extended periods, and for outdoor storage labels that need to survive weather exposure.

Recently viewed